The Application of YCB Stainless Steel Arc Gear Pump

The YCB stainless steel circular arc gear pump, as the name suggests, is a gear pump made of stainless steel. It is a commonly used type of stainless steel pump. In addition, stainless steel pumps also include various types such as stainless steel water pumps, stainless steel centrifugal pumps, stainless steel magnetic pumps, and stainless steel screw pumps

The conveying purpose of YCB stainless steel arc gear pump:

The YCB stainless steel arc gear pump can transport non lubricating oil, beverages, and low corrosive liquids.

. In addition to ordinary motors, this series of stainless steel pumps can also be equipped with performance stable motors of the same specifications according to user needs

This stainless steel pump is equipped with copper gears to transport low internal point liquids such as gasoline, benzene, etc

Classification of YCB stainless steel arc gear pumps:

Stainless steel pumps include: BW series stainless steel insulation pumps, RCB series stainless steel asphalt insulation pumps, YCB stainless steel insulation arc gear pumps, YCB series stainless steel arc gear pumps, 2CY stainless steel gear pumps.

Among them, the BW series stainless steel insulated gear pump is designed to transport media that thickens, solidifies, or crystallizes at room temperature while maintaining a certain temperature and is easy to flow, such as asphalt, paraffin, rosin, heavy oil, resin, and similar liquids, with a temperature not exceeding 300 ℃

The RCB series stainless steel asphalt insulation pump is suitable for conveying liquids that are corrosive or non corrosive and have high hygiene requirements. The conveying medium does not contain solid particles, with a temperature not exceeding 200 ℃ and a viscosity of 5--1500cSt. This stainless steel pump is widely used in various chemical raw materials, heavy oils, asphalt, adhesives, resins, filling medicine, food, cosmetics, pesticides, detergents, printing and dyeing, brewing, resin, etc Rubber and other industries

Structural characteristics of stainless steel pumps:

KCB stainless steel gear pumps mainly consist of gears, shafts, pump bodies, safety valves, and shaft end seals.

. The gear has high hardness and strength after heat treatment, and is installed together with the shaft in a replaceable shaft sleeve for operation. The lubrication of all parts inside the pump is automatically achieved using the output medium during pump operation

The pump has customized oil discharge and return grooves as needed, which reduce the torque force borne by the gears during operation, resulting in low bearing load, low wear, and good pump efficiency

The stainless steel pump is equipped with a safety valve as overload protection. The total reflux pressure of the safety valve is 1.5 times the rated discharge pressure of the pump, and can also be adjusted according to actual needs within the allowable discharge pressure range. However, it should be noted that this Enron valve cannot be used as a pressure reducing valve for long-term operation. If necessary, it can be installed separately on the pipeline

From the extended end of the spindle towards the pump, it rotates clockwise