LQB asphalt insulation pump

LQB asphalt insulation pump is suitable for conveying non corrosive, solid particle free, and solidifying media at room temperature, especially suitable for outdoor installation in high-altitude cold areas and occasions where the media needs insulation during the process. The media temperature can reach 250 ℃ and the viscosity is 5-1500 cst

LQB Asphalt Insulation Pump Usage

Used for transporting heavy oil, asphalt, rubber, resin, detergent, etc.

Structural form

The LQB asphalt insulation pump body is equipped with a hollow interlayer and inlet and outlet flanges, which can be used for heating, insulation, and cooling of transported liquids and pumps using media such as thermal oil, steam, and hot water.

Structure and Characteristics

The main flow parts of LQB asphalt insulation pump are equipped with hollow interlayers, and are equipped with functions such as heating and insulation for conveying liquids and pumps through steam, hot/hot water, and thermal oil. When conveying viscosity is high, transmission methods such as reducers, speed regulating motors, or pulleys should be used to reduce the pump speed.

Scope of application and main uses

The material of LQB asphalt insulation pump is cast steel, which has a lifespan of more than 5 times that of cast iron. Class II material Q235 is suitable for conveying non corrosive heavy oil/asphalt below 350 ° C, which does not contain solid particles and has a solidification zone at room temperature, as well as outdoor installation and insulation requirements in high-altitude cold areas during the process.